Apple’s AirPrint technology allows you to print directly from iPhones, iPads, and Mac devices without installing additional drivers. Brother printers support AirPrint, making wireless printing convenient and simple. However, sometimes users encounter problems where Brother AirPrint not working +1-803-866-1601 properly with Brother printers. If you are facing this issue, don’t worry—this guide explains the reasons behind it and provides step-by-step solutions.

|--Click Here to Start a live chat with our support team --|

Common Reasons Why Brother AirPrint May Not Work

Several factors can cause AirPrint to stop functioning:

1. WiFi Connection Issues – The printer and Apple device are not connected to the same WiFi network.

2. Printer Not AirPrint-Enabled – Older Brother models may not support AirPrint.

3. Firmware Outdated – AirPrint requires updated printer firmware.

4. Router Problems – Weak signals, dual-band conflicts, or firewall settings can block connections.

5. Printer Status Issues – If the printer is offline, in sleep mode, or has errors, AirPrint won’t function.

6. Network Settings Errors – Incorrect IP addresses or DHCP issues can prevent communication.

How to Fix Brother AirPrint Not Working

1. Check WiFi Connection

1. Make sure your Brother printer and Apple device (iPhone, iPad, or Mac) are connected to the same WiFi network.

2. If your router has both 2.4GHz and 5GHz bands, connect both devices to the same band to avoid conflicts.

3. Restart your WiFi router to refresh the network.

2. Confirm Printer Compatibility

1. Visit the official Brother website to verify whether your model supports AirPrint.

2. If AirPrint is not supported, you can still print using the Brother iPrint&Scan app as an alternative.

3. Update Printer Firmware

1. Go to Brother’s official support page and download the latest firmware update tool for your model.

2. Install the update on your printer through a computer or WiFi.

3. After updating, restart your printer and try printing again via AirPrint.

4. Restart Devices

1. Turn off your printer, Apple device, and router.

2. Wait at least 30 seconds, then power them back on.

3. This simple reset often fixes temporary connection problems.

5. Check Printer Status

1. Ensure the printer is powered on and not in sleep mode.

2. Make sure there are no error messages such as paper jams or low ink.

3. Set the printer to online mode if it shows as offline.

6. Verify Network Settings

1. Print a Network Configuration Report from your Brother printer menu.

2. Check that the IP address matches your network range.

3. If the IP address is incorrect, reconfigure the printer’s network settings.

7. Disable VPN or Firewall Restrictions

1. If you are using a VPN on your iPhone, iPad, or Mac, disable it temporarily because it can block AirPrint.

2. Check router firewall settings to ensure AirPrint communication is not restricted.

8. Try Alternative Printing Methods

If AirPrint still does not work:

1. Use the Brother iPrint&Scan app, available on the App Store.

2. Connect via USB cable to your computer and print normally.

3. Use Email Print or Cloud Print features if supported by your printer model.

Preventing Future AirPrint Issues

1. Keep your Brother printer’s firmware updated regularly.

2. Ensure your WiFi router is stable and free from frequent disconnections.

3. Restart your printer periodically to refresh network settings.

4. Place the printer closer to the WiFi router for a stronger signal.

Final Thoughts

When Brother AirPrint not working +1-803-866-1601, the issue usually comes down to network connectivity, outdated firmware, or incorrect settings. By checking the WiFi, updating the printer, verifying compatibility, and troubleshooting network issues, you can quickly restore AirPrint functionality. If problems persist, the Brother iPrint&Scan app is a reliable backup solution.